RULE-01
Who may enter—and when?
Define users, credentials, access groups, time schedules, holidays and approval responsibilities.
Solutions / Access Control
Access Control & Security Systems
Control doors, restricted areas, lifts and car parks through one documented set of access rules—from door schedules and interface logic to programming, testing and administrator training.
TWINS TECH / SYSTEM NOTE
CARD READERS · DOOR CONTROLLERS · BARRIERS · LIFT · CCTV · IBMS
Access Architecture
From a single controlled door to integrated site access.
The system is planned around who needs access, where, at what times, through which credential and how events should be monitored or released.
- Conventional and IP-based access control
- Card readers and door controllers
- Visitor-management integration
- Car-park barrier integration
- Lift or elevator-control integration
- CCTV and IBMS integration
- Short- and long-range hands-free access
- Programming and user configuration
- Testing and commissioning
- Troubleshooting and maintenance
Access Control Platforms
Make the access rules visible across every interface.
Our current Access Control platform coverage is focused on Entrypass and MicroEngine for configuration, door control, barriers, lifts and building-system interfaces.
- Entrypass
- MicroEngine
Names and marks identify systems in our technical experience; they do not indicate manufacturer authorisation or endorsement. Review all platform experience.
Questions Before Programming
Access rules must be agreed before they become controller settings.
A reader may accept a card while the overall door sequence is still wrong. We coordinate the operational policy, door hardware and interface response before the commissioning script is written.
RULE-02
What should happen at the door?
Coordinate locks, door contacts, exit devices, break-glass units, local alarms and emergency release requirements.
RULE-03
Which systems need the same event?
Map access, CCTV, visitor, lift, barrier, intrusion and building-system interfaces before programming.
RULE-04
What evidence must be retained?
Set event history, operator permissions, reports, backup and handover requirements for the way the premises is managed.
Project Deliverables
A controlled baseline for installation, programming and handover.
Deliverables are matched to the appointed scope and available project information. A complete package can include the records below.
ACS-01
Door & Device Schedule
Controlled openings, readers, locks, contacts, request-to-exit devices, controllers and interfaces listed by location.
ACS-02
Access-Level Matrix
Credential groups, doors, floors, lanes, schedules and operator permissions structured for review before programming.
ACS-03
Interface & Release Matrix
Fire-alarm release, CCTV association, lift control, barrier and third-party inputs or outputs documented for testing.
ACS-04
Programming Baseline
Controller, user, schedule and event settings configured to the approved rules, with a backup where the platform supports it.
ACS-05
Functional Test Records
Valid and invalid access, alarms, releases, events, barriers, lifts and agreed interfaces verified by test scenario.
ACS-06
Handover Information
As-built inputs, schedules, configuration records, O&M information and administrator or operator training.
Send the door list—not only the reader quantity.
Share the site and premises type, controlled door or lane count, lift and barrier scope, credential preference, required integrations and target programme. If door hardware is already selected, include the door schedule, fire-alarm release requirement and available access-level matrix.